Please watch our video below. Some useful tips:
- Apply when the temperature is somewhere around 21c/70f or warmer. If you're not able to do that, ensure the surface is warmed up with a hair dryer or heat gun, and use gentle heat, if needed, during application.
- There's no need to stretch the vinyl, just use a little tension to pull it into place.
- For all colors other than matrix black, carbon fiber black and matter black, we will ship a matte black layer to use as the first (bottom) layer. This is to prevent the light bleeding through, and should be applied first. For the black colors mentioned above, you'll still get two pairs, although one should suffice, so the other can be used as a spare.